Port Facility Security Officer Training
PFSO/FSO training: what the ISPS Code, U.S. 33 CFR 105.205 and Canada's MTSR require, how to choose a course, and where the role leads.
By CPE Faculty · Published October 27, 2026
Port facility security officer training prepares the person who owns a port facility's security plan: the assessment, the plan itself, the drills, the audits, and the link to law enforcement. Internationally the role is the Port Facility Security Officer (PFSO) under the ISPS Code. In the United States it is the Facility Security Officer (FSO) under 33 CFR 105.205, and in Canada the Marine Facility Security Officer under the Marine Transportation Security Regulations.
The training is not a single universal course. What a PFSO must know is set by the ISPS Code and by each country's regulations, and the course you need depends on where your facility sits. This guide covers what each framework requires, how to judge a course, and where the role leads once you have mastered it.
What Does a Port Facility Security Officer Do?
A PFSO is accountable for the security of one port facility, or several. The IMO describes the role as the officer charged with assessing security and with preparing and implementing effective security plans. The ISPS Code, which entered into force on 1 July 2004 under SOLAS chapter XI-2, requires port facilities to designate that officer.
In practice, the U.S. rule spells the job out in detail. Under 33 CFR 105.205, the FSO must, among other duties:
- Ensure the Facility Security Assessment is conducted and the Facility Security Plan is developed and implemented
- Ensure an annual audit is conducted, and the assessment and plan updated when needed
- Ensure regular security inspections, and training for personnel with security duties
- Record and report security occurrences, and notify law enforcement and emergency responders as soon as possible
- Execute Declarations of Security with vessels, and keep security equipment operated, tested, calibrated, and maintained
- Report changes in MARSEC levels to the owner or operator and the Captain of the Port
The FSO can hold other jobs in the company and can cover more than one facility, provided the facilities are in the same Captain of the Port zone and no more than 50 miles apart. Security tasks can be delegated, but the responsibility stays with the FSO.
What Training Does the ISPS Code Require?
The ISPS Code sets the international baseline. Part A is mandatory and Part B gives recommended guidance on how to meet it. Port facility security officers must have the knowledge and training to carry out the duties the Code assigns to them.
Most PFSO courses outside the United States are built on IMO Model Course 3.21, Port Facility Security Officer. It sits in a family of IMO security courses: 3.19 for Ship Security Officers, 3.20 for Company Security Officers, and 3.24 and 3.25 for port facility staff with and without designated security duties.
National administrations decide how that training is approved and certified. Before enrolling, check that the course is recognized by the maritime administration responsible for your facility.
What Does a U.S. Facility Security Officer Need to Know?
In the United States, 33 CFR 105.205(b) requires the FSO to have general knowledge, through training or equivalent job experience, of:
- The security organization of the facility
- General vessel and facility operations and conditions
- Vessel and facility security measures, including the meaning and requirements of each MARSEC level
- Emergency preparedness, response, and contingency planning
- Security equipment and systems, and their operational limitations
- Methods of conducting audits, inspections, control, and monitoring
The FSO must also be trained, as appropriate, in fifteen further areas. These include relevant international and U.S. law, security assessment methodology, handling sensitive security information, recognizing dangerous substances and threatening behavior, physical searches and non-intrusive inspections, and running and assessing drills and exercises. The FSO must hold a TWIC and know its requirements.
Drills and exercises are part of the job, not just the training. Under 33 CFR 105.220, a facility must run at least one security drill every three months and an exercise at least once each calendar year, with no more than 18 months between exercises.
Federal law also points toward a fuller program. 46 U.S.C. 70125 directs the Secretary of Homeland Security to establish comprehensive FSO training requirements leading to certification. It lists topics such as facility security plans, security force operations, access control, cargo theft prevention, container security, and evacuation procedures.
What Does Canada Require of a Marine Facility Security Officer?
Canada uses the term Marine Facility Security Officer. Section 305 of the Marine Transportation Security Regulations requires training or job experience in more than twenty areas relevant to the facility's industry. They include the MARSEC levels, emergency preparedness, audits and inspections, access control, facility security assessments, drills and exercises with vessels, relevant conventions and legislation, threat recognition, and crowd management.
Section 306 makes the officer responsible for submitting the facility security plan to the Minister for approval, implementing and auditing it, reporting threats to law enforcement and breaches to the Minister, and ensuring drills and exercises take place.
How Do You Choose a PFSO or FSO Course?
A good course is the one your regulator accepts and that teaches you to run a real plan. Five checks narrow the field:
- Jurisdiction. Match the course to the regime your facility answers to: the ISPS Code and your national administration, 33 CFR Part 105 in the U.S., or the MTSR in Canada.
- Recognition. Confirm the course is approved or recognized by the relevant authority before you pay, and ask for the approval reference.
- Coverage. Compare the syllabus line by line against the knowledge list in your regulation, including assessments, plans, drills, and audits.
- Practical work. Prefer courses that make you build or critique a facility security assessment and run a tabletop exercise, not only sit through slides.
- Refresher path. Ask how the provider keeps you current as threats and rules change, since the regulations expect knowledge of current security threats and patterns.
Where Does the PFSO Role Lead?
The PFSO sits where operations, regulation, and the executive suite meet. The officer deals with the Captain of the Port or the national administration, with terminal operators and vessel masters, and with the executives who fund the plan. That makes it one of the clearest routes from a specialist role toward port leadership.
The move up asks for more than security. Port directors are also judged on finance, commercial strategy, infrastructure, and governance. The Certified Port Executive™ Program covers security as one of 18 modules, Safety, Security and Emergency Planning and Response, alongside port governance, terminal operations, pricing, finance, and strategic planning. It is built for security managers and other specialists preparing for that broader seat.
For the executive view of the same subject, see Port Security: The Executive View and What Is Maritime Security?. To compare credentials for the next step, see Maritime Certifications Compared.
Frequently Asked Questions
What is a port facility security officer?
A port facility security officer (PFSO) is the person a port facility designates under the ISPS Code to assess its security and to prepare, implement, and maintain its security plan. In the United States the equivalent role is the Facility Security Officer (FSO) under 33 CFR 105.205, and in Canada it is the Marine Facility Security Officer.
Is PFSO training mandatory?
The ISPS Code requires port facility security officers to have the knowledge and training to perform their duties. In the United States, 33 CFR 105.205 requires the FSO to have specified knowledge through training or equivalent job experience, plus training in further security subjects as appropriate. Approval and certification rules vary by country.
What is IMO Model Course 3.21?
IMO Model Course 3.21 is the International Maritime Organization's model course for the Port Facility Security Officer. Training providers and maritime administrations use it as the basis for PFSO courses. Related IMO courses cover ship security officers (3.19), company security officers (3.20), and port facility security personnel (3.24 and 3.25).
What is the difference between a PFSO and an FSO?
They describe the same function under different rules. PFSO is the ISPS Code term used internationally. FSO is the U.S. term under 33 CFR Part 105, which implements the Maritime Transportation Security Act. U.S. FSOs must also hold a TWIC and know its requirements.
How often must a port facility run security drills?
In the United States, 33 CFR 105.220 requires at least one security drill every three months and an exercise at least once each calendar year, with no more than 18 months between exercises. Other administrations set their own schedules under the ISPS Code.
References
- International Maritime Organization — SOLAS XI-2 and the ISPS Code
- International Maritime Organization — Model courses on maritime security
- 33 CFR 105.205 — Facility Security Officer
- 33 CFR 105.220 — Drill and exercise requirements
- 46 U.S.C. 70125 — Port security training for facility security officers
- Marine Transportation Security Regulations (SOR/2004-144), sections 304–306 — Justice Laws Website
Train to run the whole port.
The Certified Port Executive™ Program — five days, 18 modules, ~1,000 alumni from 103+ port authorities.